Guardian 01608 - Components and Installation; Components and Specifications

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com
3
Materials:
Chain: galvanized steel
Web: polyester and nylon
Connectors : galvanized steel.
Part # Length Description
01616
01617
24”
24”
Swivel Rebar Hook & Clevis Pin Snap Hooks
Rebar Hook & Clevis Pin Snap Hooks
Compatibility: When making connections with Chain Positioning Lanyard, eliminate all possibility of roll-out.
Roll-out occurs when interference between a hook and the attachment point causes the hook gate to
unintentionally open and release. All connections must be selected and deemed compatible with Rebar
Positioning Device by a Competent Person. All connector gates must be self-closing and self-locking, and
withstand minimum loads of 3,600 lbs. See the following for examples of compatible/incompatible
connections:
Components and Specifications
Quick Link
Carabiners
Snap HooksRebar Hook
Connector
closed and
locked to
D-ring. OK.
Connector
to integral
lanyard.
NO.
Two or more
snap hooks or
carabiners
connected to
each other. NO.
Two connectors
to same
D-ring. NO.
Connector
directly to
horizontal
lifeline. NO.
Connector
directly to
webbing.
NO.
Incompatible
or irregular
application,
which may
increase risk
of roll-out. NO.
01608 26” Swivel Rebar Hook & Snap Hooks (Grade 80 Chain)
01610 24”
Web Assembly w/Rebar Hook & Snap Hooks