Guest CHARGEPRO 1.5 - User Manual

01/17 A
Specifications subject to change without notice
Guest
®
ChargePro
™
Factory Service and Technical Support
15 Dartmouth Drive, STE 101
Auburn, New Hampshire 03032
603-433-4440
1-800-824-0524
www.chargepro.com
Made in China
Owner's Manual and Installation Guide
Model Number: Serial Number: Date of Purchase:
Conforms to UL STD. 1236
Certified to CSA STD. C22.2 No. 107.2
FCC Class B
Design and Constructed to ABYC A-31
5005962
CEC Listed
BC
For use with 12 Volt Flooded, Gel and AGM (Absorbed Glass Mat) Lead Acid Batteries. Not for 6 Volt Batteries.
Not for 4D and 8D large capacity batteries.
Ignition* & Polarity Protected
*Ring Terminal Cable Required
Auto Maintain
Monitored float range
12.9 VDC to 14.1 VDC
Model
Part No.
Volts Amps No. Bat AC InCables Size
ChargePro 1.5 2701A 12 VDC 1.5 1 120 +/-
10% 60 Hz
6’ 5” x 5.81” x 1.97”
MARINE/AUTO/POWERSPORTS/TRACTORS
Do not return this product to retailer or dealer for any service or warranty requirements.
Please call our Customer Care Department at 800-824-0524 from 8:30 am to 5pm
Eastern Time for any warranty, service or installation assistance.
Thank you - Guest
®
Customer Care
Your
Satisfaction
is Important
to Us!
IMPORTANT NOTICE
Please save and read all safety, operating and installation instructions before installing or applying
AC power to your Guest
®
ChargePro
™
1.5 Amp Dual Use Maintainer and Charger.
CHARGE PRO 1. 5
TM
1.5 Amp Battery Maintainer & Charger
Energy Saving
Technology
BC
3 Year
Warranty
IP65
Weatherproof
Flooded, Gel & AGM
lead acid batteries
Battery
For 1
12 V

Summary

Introduction

Safety Instructions

Important Safety Instructions

Essential safety guidelines and warnings for operating the battery maintainer and charger.

Extension Cords

Guidelines for selecting and using appropriate extension cords for safe operation.

Grounding and AC Power Cord Connection

Instructions for proper grounding and AC power cord connections to prevent shock.

Personal Precautions

Personal safety measures to take when working near batteries or the charger.

Preparing to Maintain and Charge a Battery

Steps to prepare batteries for charging and maintenance, including ventilation and cleaning.

ChargePro 1.5 Location & DC Connection

ChargePro 1.5 Location

Recommended placement of the charger unit to avoid battery gases and ensure proper ventilation.

DC Connection Precautions

Safety precautions for connecting and disconnecting DC output cables from the battery.

Portable Use with DC Clamps for In-Vehicle Battery Maintaining Safety Precautions

In-Vehicle Battery Maintaining Steps

Step-by-step guide for safely connecting the charger to a vehicle battery while installed.

Portable Use with DC Clamps for Out-of-Vehicle;Boat Battery Maintaining Safety Precautions

Out-of-Vehicle Battery Maintaining Steps

Step-by-step guide for safely connecting the charger to a battery outside a vehicle or boat.

General Overview

Standard Product Features

Highlights key features such as dual-use design, LED display, and quick connect cables.

General Operation

LED Status Center - Operation and Display

Explanation of the LED indicators for power, charging status, and auto-maintain mode.

Portable Setup

Typical Portable Set Up with DC Clamps for In-Vehicle Maintaining

Illustrates a typical portable setup for vehicle battery maintenance with negative chassis ground.

Wiring Diagrams

Ignition Protected On-Board Installed Applications

Instructions for on-board installation requiring ignition protection using ring terminals.

Installation

On-Board Installation with Ring Terminal Cable Assembly

Guidance for permanently mounting the charger on-board, including mounting hole procedures.

Operation

Recommended Usage Guide

Guide on recommended usage for different battery capacities and applications.

Maintaining Batteries

Step-by-step process for maintaining 12V batteries using the ChargePro™ 1.5.

Maintenance

Owners Periodic Maintenance Guide

Schedule and procedures for periodic maintenance of battery connections, wiring, and hardware.

Troubleshooting

Trouble Shooting Guide

Common problems and their solutions, including LED indicator issues and charging failures.

Warranty

ChargePro 1.5 Warranty

Information on the limited three-year factory warranty, including conditions and claim procedures.

Guest CHARGEPRO 1.5 Specifications

General

Number of Banks	1
Input Voltage	100-240V AC
Charging Ports	1
Output Current	1.5A
Compatibility	lead-acid batteries
Protection Features	Overcharge Protection, Short Circuit Protection
Output Voltage	12V DC