Guest Trolling Charger 2607A

To Next Page

Trolling Charger Series

OWNER’S MANUAL

ON BOARD BATTERY CHARGERS

Models Amperage No. Of Banks Volts

2607A 3, 3 Amps 2 Bank 12/24

2608A 6 Amps 1 Banks 12

2610A 5, 5 Amps 2 Banks 12

2611A 5, 5 Amps 2 Banks 12/24

See Connection diagrams for warnings.

IMPORTANT NOTICE

This manual contains important safety and operating instructions for the charger. Read

the entire manual before using. Also read all instructions and cautions for and on the

charger, batteries and equipment in the vicinity of the batteries.

1. INTRODUCING THE CHARGER

The Guest model 2607A, 2608A, 2610A and 2611A are designed to both recharge

your batteries, and extend your battery’s life in applications where it is stored for long

periods of time. They are “3-stage” electronic, completely automatic, lightweight, silent,

battery chargers and each output produces 12 Volts DC at either a full 3, 6 or 5 Amps

(model specific), while using much less AC current than other charger types. Unlike

automotive “trickle” chargers, the 2607A, 2608A, 2610A and 2611A will not boil off the

electrolytes in properly installed and maintained batteries. The red and green LED’s,

mounted on the charger face, let you know the unit is recharging and maintaining your

batteries. This sophisticated device is ideal for recharging and maintaining the 12VDC

batteries in your boat, electric vehicle or cart, ATV, snowmobile or motorcycle.

SAVE THESE INSTRUCTIONS

Main Page

Need help?

Do you have a question about the Guest Trolling Charger 2607A and is the answer not in the manual?

Summary

Important Safety Notice

Introducing the Charger

Warnings and Safety Precautions

Personal Safety Precautions

Safety measures for working with chargers and batteries.

Preparing to Charge Precautions

Precautions before charging a battery.

AC Connection and Grounding Precautions

Installing the Charger

Choosing Charging Location

Guidelines for selecting a suitable location for the charger.

Mounting the Charger

Steps for physically mounting the charger unit.

DC Connections and Specifications

Making DC Connections

Instructions for connecting the charger to the battery terminals.

Battery Size Recommendations

Recommended maximum battery sizes for different amp banks.

2607 A Model Connections

2611 A Model Connections

2610 A Model Connections

Operating the Charger - 6 Amp Output

6 Amp Output LED Indicators

Explains the LED indicators and operating stages for 6 amp output.

Operating the Charger - 5 Amp Output

5 Amp Output LED Indicators

Explains the LED indicators and operating stages for 5 amp output.

Operating the Charger - 3 Amp Output

3 Amp Output LED Indicators

Explains the LED indicators and operating stages for 3 amp output.

Troubleshooting

Troubleshooting LED Indicator Issues

Addresses issues with red, green, or both LEDs staying on or not turning on.

Maintaining the Charger

Specifications

FCC EMC Compliance Notice

Limited Warranty