GUIL - TORO lifters
31
www.guil-lifters.com - GUIL
-
• A regular technical inspection of the TORO lifter must be carried out (depending on the regulations in your
country and the frequency of use of the lifter) by a GUIL
®
authorised technician, to establish the condition of
all its parts.
• Your GUIL
®
lifter is made with high quality long-lasting components. In the event of having to change a
component it is important that it is replaced with an original spare part. GUIL
®
will not take responsibility for
any direct or indirect consequence due to incorrect use, carelessness or bad maintenance. The guarantee will be
invalid if non-original components are used or if any modifications are made to the tower.
• Do not replace parts of the TORO lifter that are critical to stability or structure with items of different strength
or specification. If it were necessary to replace parts, please contact your dealer or the manufacturer GUIL
®
.
RISK ASSESMENT
TASK
PRE-OPERATION INSPECTION
EVALUATED MACHINE: TORO RANGES B, C & D
Identified Risk
Likelihood Severity Consequence
Corrective Measures
L M H SD D ED I To Mo H In
LOSS OF EXTERNAL
COMPONENTS.
X X X
REPLACE THE LOST EXTERNAL
COMPONENTS.
DAMAGE TO THE HAND WINCH.
X X X
CONSULT A GUIL TECHNICIAN.
DETERIORATION OF THE STEEL
CABLE.
X X X
CONSULT A GUIL TECHNICIAN.
DETERIORATION OF THE MAST
PROFILES.
X X X
CONSULT A GUIL TECHNICIAN.
BADLY SECURED CABLE.
X X X
SECURE CABLE AS INDICATED BY
THE MANUFACTURER.
BROKEN COMPONENTS.
X X X
REPARE BROKEN COMPONENTS.
DAMAGE TO SURFACE
TREATMENT.
X X
CONSULT A GUIL TECHNICIAN.
MISSING LABELS.
X X X
REPLACE LABELS.
Likelihood
L Low
M Medium
H High
Severity
SD
Slightly
Damaging
D Damaging
ED
Extremely
Damaging
Consequence
I Insignificant Risk
To Tolerable Risk
Mo
Moderate Risk
H High Risk
In Intolerable Risk
To Next Page
Loading...
Need help?
General