GUIL TORO D Series User Manual

GUIL - TORO lifters
www.guil-lifters.com - GUIL
- 32
TASK
LIFTER SET-UP
EVALUATED MACHINE: TORO RANGES B, C & D
Identified Risk
Likelihood Severity Consequence
Corrective Measures
L M H SD D ED I To Mo H In
UNLEVEL OR DETERIORATED
GROUND.
X X X
INSTALL SUPPORT ELEMENTS.
UNSTABLE OR SLIPPERY
GROUND.
X X X
INSTALL BLOCKING ELEMENTS.
OVERHEAD OBSTACLES.
X X X
ENSURE THAT NOTHING CAN
BREAK OFF OR FALL DOWN.
PRESENCE OF HIGH OR LOW
VOLTAGE CABLES.
X X X
PREVENT ANY CONTACT WITH
ELECTRIC CABLES.
BAD WEATHER CONDITIONS.
X X X
DO NOT SET UP.
UNPREDICTABLE WEATHER
CONDITIONS.
X X X
USE EXTRA SAFETY PRECAUTIONS.
THE STRAIGHT STABILISER LEGS
DO NOT LOCK INTO THE
HORIZONTAL POSITION.
X X X
1.- DO NOT LIFT.
2.- CONSULT A GUIL TECHNICIAN.
THE STRAIGHT STABILISER LEGS
SCREW JACKS CANNOT BE
ADJUSTED.
X X X
1.- DO NOT LIFT.
2.- LOOSEN THE LOCKING BOLT ON
THE SIDE, WITH THE ALLEN KEY.
3.- CONSULT A GUIL TECHNICIAN.
THE SIDE STABILISER LEGS
CANNOT BE UNFOLDED OR
FOLDED.
X X X
1.- DO NOT LIFT.
2.- ACTIVATE THE BLOCKING LEVER
AND UNFOLD OR FOLD THE SIDE
STABILISER LEG.
3.- CONSULT A GUIL TECHNICIAN.
THE SIDE STABILISER LEG
BLOCKING LEVER DOES NOT
WORK.
X X X
1.- DO NOT LIFT.
2.- PUT THE PRESSURE SPRING
BACK INTO PLACE.
3.- CONSULT A GUIL TECHNICIAN.
THE SIDE STABILISER LEG
BLOCKING SYSTEM SHELL IS
DAMAGED.
X X X
1.- DO NOT LIFT.
2.- CHANGE THE COMPONENT.
THE SIDE STABILISER LEG
LEVELLER CANNOT BE
ADJUSTED.
X X X
1.- DO NOT LIFT.
2.- CHECK THAT THE LEVELLER
SCREW JACK ISN’T AT ITS
ADJUSTING LIMIT.
3.- CHANGE THE COMPONENT.
UNQUALIFIED PERSONNEL.
X X X
COMPLETELY PROHIBITED.

GUIL TORO D Series Specifications

General

Brand	GUIL
Model	TORO D Series
Category	Lifting Systems
Language	English