Guldmann GH3 - Supplementary Modules Overview

Menu Start
Scale
KG
Show
Statistics
2008.04.22
Next service
Setup
Setup
Change
Language
English
20
© Guldmann GB/US-12/2018 • # 550383_9.00
© Guldmann GB/US-12/2018 • # 550383_9.00
2.05 Conguration of supplementary modules, GH3
Before the GH3 is put into use, the hoist must be congured. Conguration
covers language (Scale module/CLM module/Service module) and the unit for
specication of weight (Scale module).
Factory setting: Language: English (UK)
Unit of weight: kg
Scale module: The weight unit can be set to kg or lb.
Class III Scale: The weight is always shown in kg.
Conguration of supplementary modules takes place from the GH3
hand control.
Setting the language
1. Press any key on the GH3 hand control to activate the hoist.
When the hoist is activated, the display on the hand control is switched on
and the Guldmann logo “G” appears.
2. Select “Menu” using the function key located immediately below the display
and then select until the “Setup” menu appears in the display.
3. Select “Setup” and then until the “Language” menu appears in the
display.
4. Select “Change” until the preferred language appears in the display, and
conrm the selection by pressing “OK”.
5. Then return to “Setup”. Select to return to the start menu.