Configures the horizontal view
(page 78).
Moves the waveform horizontally
(page 78).
Selects the horizontal scale (page
78).
Moves the waveform vertically
(page 82).
Configures the vertical scale and
coupling mode for each channel
(page 82).
Selects the vertical scale (page 82).
Accepts input signals: 1MΩ±2%
input impedance, BNC terminal.
Accepts the DUT ground lead to
achieve a common ground.
Performs math operations (page
58).
Facilitates transferring waveform
data, display images, and panel
settings (page 99).
Probe
compensation
output
Outputs a 2Vp-p, square signal for
compensating the probe (page
117) or demonstration.
Accepts an external trigger signal
(page 85).
To Next Page
Loading...
