GW Instek GDS-1102-U - Saving the Waveform

SAVE/RECALL
105
File utilities
To edit the USB drive contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page 99.
File
Utilities
Saving the waveform
Procedure
1. (For saving to USB flash
drive) Insert the USB flash
drive into the front panel
USB port.
2. Press the Save/Recall key
twice to access the Save
menu.
Save/Recall
Save/Recall
3. Press Save Waveform.
Save
Waveform
4. Press Source. Use the
Variable knob to select the
source signal.
Source
VARIABLE
CH1 ~ CH2
Channel 1 ~ 2 signal
Math
Math operation result (page 58)
RefA, B
Internally stored reference
waveforms A, B
5. Press Destination repeatedly
to select the file destination.
Use the Variable knob to
select the memory location.
Destination
Memory
VARIABLE