CONFIGURATION
89
Configuring the video trigger
1. Press the Trigger menu key.
2. Press Type repeatedly to
select video trigger. The
video trigger indicator
appears at the bottom of the
display.
3. Press Source repeatedly to
select the trigger source
channel.
4. Press Standard repeatedly to
select the video standard.
5. Press Polarity repeatedly to
select the video signal
polarity.
6. Press Line repeatedly to
select the video field line.
Use the Variable knob to
select the field.
NTSC: 1 ~ 262 (Field 2), 1 ~ 263
(Field 1) PAL/SECAM: 1 ~ 312
(Field 2), 1 ~ 313 (Field1)
To Next Page
Loading...
