GW Instek GDS-1102-U - Page 88

GDS-1000-U Series User Manual
88
Range
Auto, Normal
5. Press Slope/coupling to enter
into the trigger slope and
coupling selection menu.
Slope /
Coupling
6. Press Slope repeatedly to
select the trigger slope,
rising or falling edge.
Slope
Range
Rising edge, falling edge
7. Press Coupling repeatedly to
select the trigger coupling,
DC or AC.
Coupling
AC
Range
DC, AC
8. Press Rejection to select the
frequency rejection mode.
Rejection
Off
Range
LF, HF, Off
9. Press Noise Rej to turn the
noise rejection on or off.
Noise Rej
Off
Range
On, Off
10. Press Previous menu to go
back to the previous menu.
Previous
Menu