6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
The file will not be saved if the
power is turned off or the USB flash
drive is removed from the USB
port.
It takes approximately 1 min to save
a 2M waveform to the USB drive in
fast mode. Detailed mode may take
over 10 times longer depending on
the speed of the USB flash drive.
7. Together with the current setup/waveform/
image, the last saved waveform file (one from
W1 ~ W15) and setup file (one from S1 ~ S15)
are also included in the folder.
To edit the USB drive contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page 99.
To Next Page
Loading...
