GW Instek GDS-820 - Page 54

GDS-806/810/820/840 Programming Manual
53
:TEMPlate:MIN (Available for firmware 2.0 and above only)
Sets and query the number of template used for minimum boundary.
Syntax
:TEMPlate:MIN {1|100}
:TEMPlate:MIN?
Returns
<NR1>
Note: A template can be defined as either MAX or MIN template only.
:TEMPlate:MODe (Available for firmware 2.0 and above only)
Sets and query the template mode. When we select Auto mode, the auto
template source is coming from CH1 or CH2. When we set normal mode, the
template is coming from 1 of the 100 templates.
Syntax
:TEMPlate:MODe {0|1}
:TEMPlate:MODe?
Arguments
0→Select auto template. 1→Select normal template.
Returns
<NR1>