9. OPTION 2 (for LCR-816/817/819/821, RS-232 is a standard
accessory)
9-1. On-line Procedure
1) Power on the LCR METER.
2) Power on the RS232 function of LCR METER. With the steps as
follows (Figure 1):
l Press MENU key.
l Press F2 key to select “SORT ” function.
l Press F3 key to select “OPTION 2” function.
l Press F1 key to select “RS232” ON.
3) Run PC LCR -VIEW Program.
4) Check the contents of the Message area under the LCR-VIEW to
make sure the Online Procedure has been well done. If not, select the
setting items above the LCR-VIEW to change the Com port and make
connection again until it is online. Please refer to Figure 9-2, 9-3, 9-4.
LCR-800 Series User Manual
67
To Next Page
Loading...
