GW Instek LCR-817 - RS232 VIEWER Software Operation

LCR-800 Series User Manual
70
9-2. RS232 VIEWER Software Operation
1) File
Press Exit（Figure 9-6）, or press Power to leave the program.
Figure 9-6
LCR-800 Series User Manual
71
2) Option
Settings
Port: There are three Ports available for selection including
Com1, Com2 and Com3. The default value is Com1.
Baudrate: After online, there are five Baudrates available for
selection including 9600, 19200, 38400, 57600 and
115200. The default value is 38400。
DataBits: There are 8 bits of Data bits and User can not change it.
Parity: None. User can not change it.
StopBits: There is only 1 Bit of StopBits, and User can not change it
(Figure 9-7).
Figure 9-7