8-2. BIN setting conditions:
MODE setting：
l Press F1.F2 key to select the white inverted characters “MODE”.
l Press F3 key to select C/D or C/R or L/Q or R/Q shown as Figure 8-2 below.
For further detailed description, please refer to 4-4-1.
Figure 8-2
CIRCUIT setting:
l Press F1/F2 key to select the white inverted characters “CIRCUIT”.
l Press F3 key to select SER or PAR shown as Figure 8-3 below. For further
details, please refer to 4-4-2
Figure 8-3
EXIT
SET BIN BIN SUM
:C/D CIRCUIT:SER.
SPEED:SLOW DISPLAY:BIN
C D
BIN
F:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS AVG : 1
SET
Press F1.F2
key to the
mode item
MODE
Press F3 key
to the C/D.
C/R.L/Q.R/Q
EXIT
SET BIN BIN SUM
MODE:C/D :SER.
SPEED:SLOW DISPLAY:BIN
C D
BIN
F:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS AVG : 1
SET
Press F2 key
to the
CIRCUIT
CIRCUIT
Press F3 key
to the SER.
PAR
LCR-800 Series User Manual
51
SPEED setting:
l Press F1/F2 key to select the white inverted characters “SPEED”.
l Press F3 key to select FAST, SLOW or MEDI shown as Figure 8-4 below.
For further details, please refer to 4-4-5.
Figure 8-4
DISPLAY setting:
l Press F1/F2 key to select the white inverted characters “DISPLAY”.
l Press F3 key to select BIN, VAL or OFF shown as Figure 8-5 (When the
BIN is selected, BIN1~BIN13 represents PASS, while PHI, PLO, and SREJ
represents FAIL result. The VAL is to display test value while the OFF
represents as non-display.)
※The display speed for above three selections is different from one another.
Figure 8-5
EXIT
SET BIN BIN SUM
MODE:C/D CIRCUIT:SER.
:SLOW DISPLAY:BIN
C D
BIN
F:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS AVG : 1
SET
Press F1. F2
key to the
SPEED
SPEED
Press F3 key
to the FAST
SLOW.MEDI
EXIT
SET BIN BIN SUM
MODE:C/D CIRCUIT:SER.
SPEED:SLOW :BIN
C D
BIN
F:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS AVG : 1
SET
Press F1.F2
key to the
DISPLAY
DISPLAY
Press F3 key
to the BIN
VAL.OFF
To Next Page
Loading...
