GW Instek MFG-2120MA - Setting the Pulse Leading Edge Time

MFG-2000 Series User Manual
106
Setting the Pulse Leading Edge Time
Panel Operation
1. Press the Waveform key.

2. Press F3 (Lead Edge). The
Lead Edge parameter will be
highlighted in the parameter
window.

3. There are two ways to set its
value :
a,Use the arrow keys and
scroll wheel
b, number pad to enter the
Duty range.

/


 




/


 



4. Press F1~F3 to choose the
unit range.
E

~

5. Repeat the above steps for the opposite edge
time.