GW Instek MFG-2120MA - Couple; Source[1|2]:Frequency:couple:mode; Source[1|2]:Frequency:couple:offset

MFG-2000 Series User Manual
358
COUPLE
The Couple commands can be used to remotely set the frequency
coupling and amplitude coupling.
SOURce[1|2]:FREQuency:COUPle:MODE
Instrument
Command
Description
Set the frequency coupling mode.
Syntax
SOURce[1|2]:FREQuency:COUPle:MODE
{Off|Offset|Ratio}
Return/ Return
parameter
Off
Disables frequency coupling.
Offset
Set frequency coupling to offset mode.
Ratio
Sets frequency coupling to ratio mode.
Example
SOURce1:FREQuency:COUPle:MODE Offset
Sets the frequency coupling mode to offset.
Query Syntax
SOURce[1|2]:FREQuency:COUPle:MODE？
Example
SOURce1:FREQuency:COUPle:MODE？
Off
Frequency coupling is turned off.
SOURce[1|2]:FREQuency:COUPle:OFFSet
Instrument
Command
Description
Sets the offset frequency when the frequency
coupling mode is set to offset.
Syntax
SOURce[1|2]:FREQuency:COUPle:OFFSet {frequency}
Example
SOURce1:FREQuency:COUPle:OFFSet 2khz
Sets the offset frequency to 2kHz (the frequency of
CH2 minus CH1 is 2kHz).
Syntax
SOURce[1|2]:FREQuency:COUPle:OFFSet?
Example
SOURce1:FREQuency:COUPle:OFFSet?