PEL-2000 Series User Manual
130
Panel Operation
1. Press F3 until Dynamic Range
mode is selected.
Note
Changing from static to dynamic mode will only affect
only the current (active) channel.
Editing CR Dynamic Parameters
CC levels
Dynamic Constant Resistance Mode has two
operating resistance Levels, slew rates and timers.
Slew rates determine the speed at which the load
will change from one level to the next.
The timers determine how long the load
module/channel will stay at level 1 or level 2. See
the CR operating description for details about slew
rates and timers, page 65
Ensure the menu is in CR Dynamic Mode. See page
129.
Parameters
Level1 Minimum ~ rating Ω
Level2
To Next Page
Loading...
