GETTING STARTED
81
Reverse voltage
Protection
Reverse voltage protection prevents reverse voltage
damage to the PEL-2000 series up to the specified
rating. When Reverse voltage protection has been
tripped an alarm tone will sound until the reverse
voltage is removed.
For more details please see the specifications.
Under voltage
Protection
Under voltage protection will turn off the load
when the voltage drops below a set limit.
Operating Configurations
Background
There are number of operating configuration
settings. Configuration settings are for the
following:
CC Vrange, Von Voltage, Von Latch, Short Key, CH
Cont, Independent load sync, D-time and Step
resolution settings.
CC Vrange
CC Vrange (page 165) is used to set the voltage
range as High or Low for CC mode. CC voltage
range is dependent on the load module
specifications.
To Next Page
Loading...
