GW Instek PEL-2002 - Configuring Alarm Sound

PEL-2000 Series User Manual
190
Configuring Alarm Sound
Background
The PEL series has two different types of alarms,
one located on the mainframe (Alarm Tone M) and
one for each load module (Alarm Tone S).
Alarm Tone(M)/(S) can individually be set ON or
OFF.
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
2. Press F5 (Other Menu).
03/02/09
10 : 30
ConfigureOther
System
Info
Load Interface Time Set
3. Use the selector knob to
highlight Alarm Tone(M)