GW Instek PEL-2002 - Page 189

OPERATION
189
versa.
With the Knob type set to Old, independent
operation is activated. Local operation changes do
not change the setting/values on the mainframe.
Parameter
Knob Type Updated/Old
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
2. Press F5 (Other Menu).
03/02/09
10 : 30
ConfigureOther
System
Info
Load Interface Time Set
3. Use the Selector knob to move
the cursor down to Knob Type
(below the initial screen).
4. Press the Selector knob to
highlight Knob Type, then turn
to change to Old/Updated.
5. Press the Selector Knob or Enter
to confirm selection.