OPERATION
213
22. To confirm deletion, press F4
again.
03/02/09
10 : 30
ConfigurePreviousSelect Rename Delete
New
Folder
Saving Setups to USB Memory
Background
Setup data contains all the channel data including
Memory, Presets and Program Sequences.
There are four setups in internal memory. When
saving to USB, all four setups will be saved.
Conversely, when recalled, all four setups will be
recalled to main memory.
The file extension *.S is used for Setup data only.
Parameters
Save File 200X0_XX.S
Update File 200X0_XX.S
Panel operation
1. Insert a USB flash drive into the
front panel USB slot.
2. Ensure the USB path has been
set.
Page 208.
To Next Page
Loading...
