GW Instek PEL-2002 - Page 176

PEL-2000 Series User Manual
176
2. Use the Selector knob to scroll
down to highlight CCH Step.
Note: CCH Step is off-screen when
entering Other menu.
3. Press the Selector knob to edit
the selected setting, turn to
change the setting.
OR
Use the number pad to enter a
number.
4. Press the Selector knob or Enter
to confirm selection.
5. Repeat steps 2-4 to edit the step
resolution of:
CCL Step
CRH Step
CRL Step
CV Step
Note
The Step resolution settings only apply to the active
channel, other channels will not be affected.