13. Use the selector knob to edit
Save or Recall File.
14. Choose a file name.
15. Press F3(Save) to save or
F4(Recall) to recall the current
channel. (MXXX)
Save
Recall
OR
16. A save or recall message will be
displayed when complete.
Note
Remember only data that has been saved to internal
memory will be saved to USB. Only the active channel
will be saved.
If you try to recall data that originated from a different
load module than the active channel, an error message
will appear. The filename must reflect the active
channel’s load module type.
To Next Page
Loading...
