GW Instek PEL-2002 - Page 237

INTERFACE
237
Pin7
MEM_2 Recall Setup memory 3
(All channels)
Pin8
MEM_3 Recall Setup memory 4
(All channels)
Pin9
Enable Enable Load (On/Off),
recall Preset memory (0-
3) and Setup memory (1-
4)
Pin10
Load On/Off
Pin11
Not used
Pin12
Not used
Pin13
Not used
Pin14
Not used
Pin15
Load Status Output, load on status.
Pin16
Alarm Status Output alarm activated.
Pin17
+5V Output, 5V+, 100mA.
Pin18
N.C No connection.
Pin19
GND Ground
Pin20
GND Ground
Pin assignment
(Frame link
connector 2)
Pin1
Sync._A Sync signal, Recall Preset
memory 0 (All channels)
Pin2
Sync._B Sync signal, Recall Preset
memory 1 (All channels)
Pin3
Sync._C Sync signal, Recall Preset
memory 2 (All channels)
Pin4
AUX Reserved