GW Instek PEL-2002 - Page 75

GETTING STARTED
75
Points
Up to 120 points can be used with each Sequence.
Each point can have a different duration, slew rate
and value.
A new point can be inserted or deleted at any stage
of a Sequence. Any new points that are inserted
will have a value averaged from its neighbors as
default.
Point1 Point2 Point4 Point5 Point6 Point7 Point3
A new point is inserted after Point 3.
Loop
Sequences can be programmed to loop a number
of times starting from any point in the sequence.
Point1 Point2 Point4 Point3
From Point3 the sequence is looped two times.