GW Instek PSU 12.5-120 - Recall Setup

PSU Series User Manual
60
13. When the setup is saved the unit will beep, the
setup will be saved and the memory number
will be shown on the display.
Saved setup
AV
VOLTAGE CURRENT
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C V C C
Recall Setup
The PSU has 3 dedicated keys (M1, M2, M3) to recall setups.
Save Setup
1. Press the SHIFT key. The shift key
will light blue.
Shift
2. Hold the desired memory key to
recall the desired setup (M1, M2,
M3).
Function
M1
3. When the setup is recalled the setup will be
loaded and the memory number will be shown
on the display.
Recalled setup
AV
VOLTAGE CURRENT
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C V C C
Note
The F-15 function setting will determine whether the
saved contents of the recalled memory setting are
displayed or not.