GW Instek PSU 60-25

To Next Page

To Previous Page

OPERATION

9. Use the Voltage knob to set the

voltage.

Voltage

Note

Notice the Set key becomes illuminated when

setting the current or voltage. If the voltage or

current knobs are unresponsive, press the Set key

first.

10. Press the Output key. The

Output ON LED becomes

lit.

Output

Example

CV will become

illuminated (center)

VOLTAGE CURRENT

VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN

C V C C

Note

Only the voltage level can be altered when the

output is on. The current level can only be changed

by pressing the Set key.

For more information on the Normal Function

Settings, see the user manual.

GW Instek PSU 60-25 - Page 29