GW Instek PSW 30-36 - Setting the Test Script Settings

OPERATION
89
Setting the Test Script Settings
Steps
The test script settings (T-01~T-04) are set with
the Test key.
1. Press the Test key. The Test key
will light up.
Test
2. The display will show T-01 on the top and the
memory no. for T-01 on the bottom. The bottom
of the screen will also indicate whether the
memory no. has a script loaded, “y” (yes) or
“n” (no).
Test Setting
Memory
number
Script not
present
Test Setting
Memory
number
Script
present
3. Rotate the Voltage knob to change
the T setting (Test setting).
Voltage
Test Run
Test Load
Test Export
Test Remove
Test Memory
T-01
T-02
T-03
T-04
T-05
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com