H3C MSR Series Probe Command Reference

5
Parameters
acltable: Specifies the ACL information.
boardinfo: Specifies the card information.
chipnoinfo: Specifies the chip number information.
globalinfo: Specifies the global variable information.
debugging: Specifies the debugging information.
isolationinfo: Specifies the port isolation information.
mactable: Specifies the MAC address entry information.
multicasttable: Specifies the multicast entry information.
qosinfo: Specifies the QoS information.
stpinfo: Specifies the STP status information.
subslot: Specifies a slot by its number in the range of 0 to 255.
Usage guidelines
This command reads software information of the DUMP switching module.
display hardware internal physical lsw vlaninfo
Use display hardware internal physical lsw vlaninfo to display VLAN information.
Syntax
display hardware internal physical lsw vlaninfo vlan-id
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
vlan-id: Specifies a VLAN by its ID in the range of 0 to 4095.
display hardware internal dump lsw vlantable
Use display hardware internal dump lsw vlantable to display VLAN entry information.
Syntax
display hardware internal dump lsw subslot-num vlantable vlan-id
Views
Probe view
Predefined user roles
network-admin
network-operator

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS