H3C MSR Series Probe Command Reference

7
chip-num: Specifies the chip number in the range of 0 to 31.
debugging physical mgf
Use debugging physical mgf to enable debugging for the forwarding card.
Use undo debugging physical mgf to disable debugging for the forwarding card.
Syntax
debugging physical mgf { all | error | event | packet }
undo debugging physical mgf { all | error | event | packet }
Default
Debugging for the forwarding card is disabled.
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all types of debugging.
error: Specifies error debugging.
event: Specifies event debugging.
packet: Specifies packet debugging.
Usage guidelines
Outputting the debugging information affects system operation efficiency. When you diagnose a fault,
use this command to enable the specified debugging, rather than all types of debugging.
display hardware internal physical mgf debugging
Use display hardware internal physical mgf debugging to display the enabled MGF debugging.
Syntax
display hardware internal physical mgf debugging
Views
Probe view
Predefined user roles
network-admin
network-operator

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS