H3C MSR Series

6
Parameters
subslot-num: Specifies a subslot by its number in the range of 0 to 255.
vlan-id: Specifies a VLAN by its ID in the range of 0 to 4095.
display hardware internal dump lsw mactable
Use display hardware internal dump lsw mactable to display MAC address entry information.
Syntax
display hardware internal dump lsw subslot-num mactable [ all | vlan vlan-id | interface-type
{ interface-number | interface-number.subnumber } ]
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
subslot-num: Specifies a subslot by its number in the range of 0 to 255.
all: Specifies all MAC address entries.
vlan-id: Specifies a VLAN by its ID in the range of 0 to 4095.
interface-type: Specifies an interface by its type.
interface-number: Specifies an interface by its number.
interface-number.subnumber: Specifies a subinterface by its interface number and subinterface number
in the range of 1 to 4094.
display hardware internal dump lsw acltable
Use display hardware internal dump lsw subslot-num acltable start-index total-num chip-num to display
DUMP ACL entry information.
Syntax
display hardware internal dump lsw subslot-num acltable start-index total-num chip-num
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
subslot-num: Specifies a subslot by its number in the range of 0 to 255.
start-index: Specifies the start index number in the range of 0 to 65535.
total-num: Specifies the total number of ACL entries in the range of 0 to 65535.