H3C MSR Series Probe Command Reference

14
keyregs: Displays addresses and values of the key registers.
priv-info: Displays private information.
debugging physical
Use debugging physical to enable IPC-related debugging.
Use undo debugging physical to disable IPC-related debugging.
Syntax
debugging physical chassis chassis-number slot slot-number { mbus | lipc | mbuf-relay } { all | error |
event | input | output }
undo debugging physical chassis chassis-number slot slot-number { mbus | lipc | mbuf-relay } { all |
error | event | input | output }
Default
IPC-related debugging is disabled.
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
chassis chassis-num: Specifies a chassis by its number, which is always 0.
slot slot-num: Specifies a slot by its number.
mbus: Specifies the management bus protocol.
lipc: Specifies Leopard IPC.
mbuf-relay: Specifies MBUF relay.
all: Specifies all types of debugging.
error: Specifies error debugging.
event: Specifies event debugging.
input: Specifies input debugging.
output: Specifies output debugging.
Usage guidelines
This command supports enabling debugging for a specified module, facilitating debugging in
development.
reset hardware internal dump slot inner-port counter
Use reset hardware internal dump slot inner-port counter to clear statistics for all internal interfaces in a
slot.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS