H3C MSR Series Probe Command Reference

1
Common probe commands
display hardware internal dump
Use display hardware internal dump to display the dump register information of a chip.
Syntax
display hardware internal dump if-name [ card ] chip chip-num [ global | channel ]
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name: Specifies a registered interface or controller by its name.
card: Specifies the card system.
chip-num: Specifies a chip by its number in the range of 0x00 to 0xFF.
global: Specifies the global register.
channel: Specifies the channel register.
Usage guidelines
This command reads the DUMP register information of the specified chip, one group of values each time.
display hardware internal physical
Use display hardware internal physical to display the dump software information.
Syntax
display hardware internal physical if-name [ boardinfo | intinfo | intinfo-priv | rxbd | statistic | txbd ]
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name: Specifies a registered interface or controller by its name.
boardinfo: Displays main board information.
intinfo: Displays basic interface information.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS