H3C S5120-EI Series Irf Command Reference

Preface
The H3C S5120-EI documentation set includes 10 command references, which describe the
commands and command syntax options for the S5120-EI Series Ethernet Switches,
Release2208.
The IRF Command Reference describes IRF configuration commands for creating an IRF
virtual device. It covers the commands for binding physical ports to an IRF port, configuring
the member switch ID and priority, and detecting and maintaining the IRF link.
This preface includes:
•
Audience
•
Added and modified commands
•
Conventions
•
About the H3C S5120-EI documentation set
•
Obtaining documentation
•
Technical support
•
Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the S5120-EI series
Added and modified commands
Compared to Release2202, Release2208 adds, modifies, and deletes the following
commands:
Command reference Added and modified commands
IRF
Added command(s):
• display irf-port load-sharing mode
• display mad
• irf domain
• irf member description
• irf-port
• irf-port load-sharing mode
• irf-port-configuration active
• mad arp enable
• mad enable
• mad exclude interface
• mad restore
• port group interface
Deleted command(s):

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English