EasyManuals Logo

H3C S6520-SI Series Command Reference

H3C S6520-SI Series
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
27
This command will restore the device from multi-active conflict state. Continue? [Y/N]:Y
Restoring from multi-active conflict state, please wait...
port group interface
Use port group interface to bind a physical interface to an IRF port.
Use
undo port group interface to remove the binding of a physical interface to an IRF port.
Syntax
port group interface interface-type interface-number
undo port group interface interface-name
Default
No physical interfaces are bound to an IRF port.
Views
IRF port view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies a physical interface by its type and number.
interface-name: Specifies a physical interface in the interface-typeinterface-number
format. No space is allowed between the
interface-type and interface-number
arguments.
Usage guidelines
Execute this command multiple times to bind multiple physical interfaces to an IRF port. In Release
6510, you can bind a maximum of eight physical interfaces to an IRF port. In R6515P06 and later,
you can bind a maximum of 16 physical interfaces to an IRF port.
Use the
shutdown command to shut down a physical interface before you bind it to or remove it
from an IRF port. To bring up the physical interface after a binding or binding removal operation, use
the
undo shutdown command.
The system does not dynamically remove IRF port bindings when IRF links are lost, for example,
because an interface module is removed. To remove IRF port bindings, you must use the
undo
port group interface
command.
For more information about IRF port binding requirements, see Virtual Technologies Configuration
Guide.
Examples
# Bind Ten-GigabitEthernet 1/0/1 to IRF-port 1/1 on IRF member 1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] shutdown
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] irf-port 1/1
[Sysname-irf-port1/1] port group interface ten-gigabitethernet 1/0/1
[Sysname-irf-port1/1] quit
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] undo shutdown

Other manuals for H3C S6520-SI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S6520-SI Series and is the answer not in the manual?

H3C S6520-SI Series Specifications

General IconGeneral
BrandH3C
ModelS6520-SI Series
CategorySwitch
LanguageEnglish

Related product manuals