37
Related commands
lldp enable (Layer 2—LAN Switching Command Reference)
lldp global enable (Layer 2—LAN Switching Command Reference)
pex associate
stp edged-port
(Layer 2—LAN Switching Command Reference)
switchto pex
Use switchto pex to log in to a PEX from the parent fabric.
Syntax
switchto pex slot slot-number
Views
System view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a PEX by its virtual slot number. The value range is the slot
numbers that have been assigned to PEXs.
Usage guidelines
After you log in to a PEX, you can execute the following commands:
The display commands.
File system management commands. To obtain information about the access permissions to
the commands, use the
display role feature name filesystem command in RBAC.
For more information about the file system management and RBAC commands, see
Fundamentals Command Reference.
To exit a PEX, execute the
quit command.
Examples
# Log in to PEX 100.
<Sysname> system-view
[Sysname] switchto pex slot 100
To Previous Page
Loading...
Need help?
General