32
Table 8 Command output
Group PEX group ID.
Tier PEX tier.
PEX 100 ---–> Parent The PEX in virtual slot 100 is attached to the parent fabric.
----> The link is up.
--X–> The link is down.
pex associate
Use pex associate to assign a virtual slot number to a PEX.
Use
undo pex associate to remove the virtual slot number of a PEX.
Syntax
pex associate slot slot-number
undo pex associate
Default
No virtual slot number is assigned to a PEX.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a virtual slot number. The value range for the slot number is 100 to
131.
Usage guidelines
For this command to take effect, you must enable PEX connection capability on the interface.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Assign virtual slot number 100 to the PEX attached to Layer 2 aggregate interface 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] pex associate slot 100
Related commands
pex-capability enable
pex auto-config enable
Use pex auto-config enable to enable PEX autoconfiguration in an IRF 3.1 system.
Use
undo pex auto-config enable to disable PEX autoconfiguration in an IRF 3.1 system.
To Next Page
Loading...
Need help?
General