H3C SecPath F10 0 Series

33
Extend BootWare Version: 1.05
Board PFC Version:Ver.A
NandFlash PCB Version:Ver.A
HD PCB Version:Ver.A
[SubSlot 0]16GE+8SFP+2XGE (Hardware)Ver.A, (Driver)1.0, (Cpld)1.0
Displaying the electrical label information for the
firewall
Use the display device manuinfo command to display the electrical label information for the
firewall.
<Sysname> display device manuinfo
Slot 1 CPU 0:
DEVICE_NAME : SecPath F1080
DEVICE_SERIAL_NUMBER : 210235A1FXH164000026
MAC_ADDRESS : 487A-DA95-91BB
MANUFACTURING_DATE : 2016-04-29
VENDOR_NAME : H3C
Fan 0:
The operation is not supported on the specified fan.
Fan 1:
The operation is not supported on the specified fan.
Fan 2:
The operation is not supported on the specified fan.
Fan 3:
The operation is not supported on the specified fan.
Power 1:
The operation is not supported on the specified power.
Table 5 Output description
Field Description
DEVICE_NAME Firewall name.
DEVICE_SERIAL_NUMBER Firewall serial number.
MAC_ADDRESS MAC address of the firewall.
MANUFACTURING_DATE Manufacturing date of the firewall.
VENDOR_NAME Vendor name.
Displaying the CPU usage of the firewall
Use the display cpu-usage command to display the CPU usage of the firewall.
<Sysname> display cpu-usage
Slot 1 CPU 0 CPU usage:
3% in last 5 seconds
3% in last 1 minute
3% in last 5 minutes