H3C SecPath F1000-AI-5 Series Installation Manual

6
Figure7-11 Front panel of the NS-NIM-TG6A interface module
(1) 10GBASE-R fiber ports
(2) Captive screw
(3) Ejector lever
Network data encryption modules
CAUTION:
The network data encryption modules are not hot swappable.
The appearance of network data encryption modules varies by models. For more information, see
H3C SecPath Firewall Network Data Encryption Module Guide.
Table7-2 describes the network data encryption module compatibility with the firewalls and software.
Table7-2 Network data encryption module compatibility with the firewalls and software
Network data
encryption
module
Applicable firewalls Applicable slots
Applicable
software version
NSQM1F1KGMC
F1000-AI-25
F1000-AI-35
F1000-AI-55
F1000-AI-65
F1000-AI-75
Slots 1 and 2 E8860P04 and later
Power supplies
The firewall provides two power supply slots PWR0 and PWR1 and supports both AC and DC
removable power supplies. No power supplies are provided with the firewall. Prepare power supplies
for the firewall yourself as required.
The firewall supports 1+1 power supply redundancy. To install two power supplies for the firewall,
make sure they are the same model.
AC power supplies
The device supports the PSR150-A1 AC power supply that provides a maximum output power of 150
W.
1
2
3

H3C SecPath F1000-AI-5 Series Specifications

General

Brand	H3C
Model	SecPath F1000-AI-5 Series
Category	Firewall
Language	English