H3C SecPath F1000-AI-5 Series Installation Manual

10
Port specifications
Console port
Table7-12 Console port specifications
Item
Specification
Connector RJ-45
Standard compliant RS-232
Baud rate 9600 bps (default) to 115200 bps
Cable type Common asynchronous serial port cable
Transmission distance ≤ 15 m (49.21 ft)
Services
• Connection to an ASCII terminal
• Connection to the serial port of a local PC running the terminal
emulation program
• CLI
GE copper port
Table7-13 GE copper port specifications
Item
Specification
Connector RJ-45
Standard compliance 802.3, 802.3u, and 802.3ab
Interface type MDI/MDI-X autosensing
Cable type Category 5 or higher twisted pair cable
Transmission distance 100 m (328.08 ft)
Interface speed and duplex mode
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
NOTE:
The interfaces on a network interface card are typically
media dependent interface (MDI) interface
s.
The interfaces on a hub or LAN switch are typically
media dependent interface crossover (MDI-X)
interfaces.
GE fiber port
Table7-14 GE fiber port specifications
Item
Specification
Connector type LC
Transceiver module type SFP
Standard compliance 1000BASE-X

H3C SecPath F1000-AI-5 Series Specifications

General

Brand	H3C
Model	SecPath F1000-AI-5 Series
Category	Firewall
Language	English