H3C WA2600 series Fundamentals Configuration Guide

10-7
A confirmation is required when you execute this command. If you fail to make a confirmation within 30
seconds or enter “N” to cancel the operation, the command will not be executed.
Displaying and Maintaining Device Management Configuration
Follow these steps to display and maintain device management configuration:
To do… Use the command… Remarks
Display information of the boot file
display boot-loader
Display the statistics of the CPU usage
display cpu-usage
[ entry-number
[ offset ] [
verbose
] [
from-device
] ]
Display history statistics of the CPU usage in
a chart
display cpu-usage history
[
task
task-id ]
Display electrical label information of the AP
display device manuinfo
Display device information
display device
[
verbose
]
Display the usage of the memory of a device
display memory
Display the reboot type of a device
display reboot-type
Display the reboot time of a device
display schedule reboot
Display detailed configurations of the
scheduled automatic execution function
display job
[ job-name ]
Display the exception handling method
display system-failure
Available in any
view
Device Management Configuration Example
Remote Upgrade Configuration Example
Network requirements
z As shown in Figure 10-2, access point (AP) serves as the FTP Client. The test.bin program and
the BootWare program boot.btm are both saved under the aaa directory of the FTP Server.
z The IP address of a VLAN interface on AP is 1.1.1.1/24, the IP address of the FTP Server is
2.2.2.2/24, and FTP Server is reachable.
z User can log in to AP through Telnet to perform operations on AP (download the application
program from FTP Server and remotely upgrade AP through command lines). Ensure that a route
exists between User and AP.

H3C WA2600 series Specifications

General

Brand	H3C
Model	WA2600 series
Category	Wireless Access Point
Language	English