H3C WX User Manual

4-26
Volume Module Command WX3024 WX3010 WX3008
hot-backup hellointerval
No No No
wlan ap-group
group-id ranges from 1 to
64.
group-id ranges from 1 to
12.
group-id ranges from 1 to
12.
wlan permit-ap-group
group-id ranges from 1 to
64.
group-id ranges from 1 to
12.
group-id ranges from 1 to
12.
display wlan client
member ipv6
ipv6-address not
supported
member ipv6
ipv6-address not
supported
member ipv6
ipv6-address not
supported
display wlan mobility-group
member ipv6
ipv6-address not
supported
member ipv6
ipv6-address not
supported
member ipv6
ipv6-address not
supported
member
member ipv6
ipv6-address not
supported
member ipv6
ipv6-address not
supported
member ipv6
ipv6-address not
supported
mobility-tunnel iactp6
not supported
iactp6
not supported
iactp6
not supported
undo member
undo member ipv6
ipv6-address not
supported
undo member ipv6
ipv6-address not
supported
undo member ipv6
/ipv6-address not
supported
WLAN roaming
commands
source
ipv6
ipv6-address not
supported
ipv6
ipv6-address not
supported
ipv6
ipv6-address not
supported
duplex
No No No
display loopback-detection
No No No
flow-control
No No No
jumboframe enable
value ranges from 1600 to
4086 bytes and defaults to
1600 bytes.
value ranges from 1600 to
9216 bytes and defaults to
1600 bytes.
value ranges from 1600 to
9216 bytes and defaults to
1600 bytes.
loopback
Only
internal
is supported Only
internal
is supported Only
internal
is supported
loopback-detection control
enable
No No No
Layer 2 – LAN
Switching Command
Reference
Ethernet interface
commands
loopback-detection enable
No No No

H3C WX Specifications

General

Brand	H3C
Model	WX
Category	Controller
Language	English