4-27
Volume Module Command WX3024 WX3010 WX3008
loopback-detection
interval-time
No No No
shutdown
No on GE1/0/1 of the
access controller engine
and GE1/0/29 on the
switching engine
No on GE1/0/1 of the
access controller engine
and GE1/0/11 on the
switching engine
No on GE1/0/1 of the
access controller engine
and GE1/0/9 on the
switching engine
speed
No No No
VLAN commands
interface vlan-interface
The maximum value is 32. The maximum value is 32. The maximum value is 32.
MAC address table
management
commands
mac-address
max-mac-count
count ranges from 0 to
2048.
count ranges from 0 to
2048.
count ranges from 0 to
2048.
Link aggregation
commands
All commands No No No
MSTP commands All commands No No No
Layer 2 forwarding
commands
All commands No No No
Port mirroring
commands
All commands No No No
pppoe-server max-sessions
local-mac
number ranges from 1 to
1024.
number ranges from 1 to
1024.
number ranges from 1 to
1024.
Layer 2 – WAN
Command Reference
PPP commands
pppoe-server max-sessions
total
number ranges from 1 to
1024 and defaults to 1024.
number ranges from 1 to
1024 and defaults to 1024.
number ranges from 1 to
1024 and defaults to 1024.
Layer 3 – IP Services
Command Reference
ARP commands
arp max-learning-num
number ranges from 0 to
2048.
number ranges from 0 to
2048.
number ranges from 0 to
2048.
To Next Page
Loading...
