H3C WX - Page 53

4-28
Volume Module Command WX3024 WX3010 WX3008
DNS commands
All commands for IPv6 DNS
configuration
No No No
ip redirects enable
No No No
ip ttl-expires enable
No No No
IP performance
optimization
commands
ip unreachables enable
No No No
Adjacency table
commands
display adjacent-table
Yes Yes Yes
All commands No No No
IPv6 basics
commands
ipv6 neighbors
max-learning-num
No No No
IPv6 application
commands
All commands No No No
display ipv6 routing-table
No No No
display ipv6 routing-table
ipv6-address
No No No
display ipv6 routing-table
ipv6-address1 ipv6-address2
No No No
display ipv6 routing-table
protocol
No No No
display ipv6 routing-table
statistics
No No No
display ipv6 routing-table
verbose
No No No
IP routing basics
commands
reset ipv6 routing-table
statistics
No No No
Layer 3 – IP Routing
Command Reference
IPv6 static routing
commands
All commands No No No
IP Multicast Command
Reference
IGMP snooping
commands
igmp-snooping fast-leave
Layer 2 aggregate
interface view not
supported
Layer 2 aggregate
interface view not
supported
Layer 2 aggregate
interface view not
supported