3
RECEIVING AND INSPECTION
Your satisfaction and safety require a complete understanding of this unit.
Read the instructions thoroughly and be sure all operators are given
adequate training before attempting to put the unit in service. NOTE: This
equipment must be used only for its intended application; any alterations or
modifications will VOID your warranty.
1.1 Inspection: The carrier, when accepting shipment, also accepts
responsibility for safe delivery and is liable for loss or damage. On
delivery, inspect for visible exterior damage, note and describe on the
freight bill any damage found, and enter your claim on the form supplied by
the carrier.
1.2 Inspect for concealed loss or damage on the unit itself, both interior and
exterior. If necessary, the carrier will arrange for official inspection to
substantiate your claim.
1.3 Return Shipment: Save the shipping crate until you are sure all is well. If
for any reason you must return the unit, first contact your customer
representative for authorization. Supply nameplate data, including model
number and serial number.
1.4 Accessories: Verify that all of the equipment indicated on the packing slip
is included with the unit. Carefully check all packaging before discarding.
These units are equipped with 2 shelves.
Sectio
To Next Page
Loading...
