Operation
18
4.5.3 Printing test results
The BODTrak II is compatible with the Citizen PD-24 printer, which is available as
an optional accessory (Section 8 on page 41). Connect the printer cable to the
serial port on the BODTrak II using the gender adapter provided with the printer.
Make sure the printer interface settings are correct (section 4.4 on page 15).
Power on the BODTrak II instrument. Push and hold the applicable channel number
for approximately 5 seconds at any time during a test. This moves the test results
from the BODTrak II to the printer. The instrument will send a copy of the graphical
display and a truncated data stream (127 data points).
To Next Page
Loading...
