Display description
Measurement screen
The meter display shows the concentration, units, temperature, calibration status, operator ID,
sample ID, date and time (Figure 6).
Figure 6 Single screen display
1 Calibration status indicator 9 Time
2 Main measurement value and unit 10 Date
3 IntelliCAL probe type and port indicator 11 Read (OK, Select)
4 Battery status 12 Display size icon
5 Power source 13 Calibrate (Cancel, Exit)
6 Sample temperature (ºC or ºF) 14 Sample and operator identification
7 Secondary measurement unit 15 Stability or display lock indicator
8 Tertiary units (for some probes)
Big-screen mode
The font size of the sample reading can be increased or decreased with the key (Figure 7).
Note:
When two probes are connected, push and hold the key to select the big-screen mode. The big-screen
mode can also be selected in the Display Options menu (Refer to Set the display options on page 19).
8
English
To Next Page
Loading...
