EasyManua.ls Logo

Hach sc100 - Page 56

Hach sc100
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
Modbus Protocol
Setup/Relay 1 Source 40050
Unsigned
Integer
1R/W
Selects data source for this relay
(0 = None; 1 = Real Time Clock;
2 = Sensor; 4 = Calculation)
Setup/Relay 1
Sensor
Select
40051
Unsigned
Integer
1R/W
Selects Sensor source when
Source = Sensor
(0 = Sensor1; 1 = Sensor2)
Setup/Relay 1
Measuremen
t Select
40052
Unsigned
Integer
1R/W
Selects measurement on the Sensor
(0 = Meas1 .. 3 = Meas4)
Setup/Relay 1 Type 40053
Unsigned
Integer
1R/W
Selects the relay type
(0=Alarm;1=Control;
2 = Status; 3 = Timer; 4 = Event)
Setup/Relay 1
Transfer
Setting
40054
Unsigned
Integer
1R/W
Selects the transfer value for the relays
(0 = De-energized; 1 = Energized)
Setup/Relay 1/Alarm High Alarm 40055 Float 2 R/W Sets the high alarm setpoint
Setup/Relay 1/Alarm Low Alarm 40057 Float 2 R/W Sets the low alarm setpoint
Setup/Relay 1/Alarm
High
Deadband
40059 Float 2 R/W Sets the high alarm deadband
Setup/Relay 1/Alarm
Low
Deadband
40061 Float 2 R/W Sets the low alarm deadband
Setup/Relay 1/Alarm On Delay 40063
Unsigned
Integer
1 R/W Sets the on delay time
Setup/Relay 1/Alarm Off Delay 40064
Unsigned
Integer
1 R/W Sets the off delay time
Setup/Relay 1/Control Setpoint 40065 Float 2 R/W Sets the controller setpoint
Setup/Relay 1/Control Phase 40067
Unsigned
Integer
1R/W
Sets the controller phase
(0=Low;1=High)
Setup/Relay 1/Control Deadband 40068 Float 2 R/W Sets the controller deadband
Setup/Relay 1/Control
Overfeed
Timer
40070
Unsigned
Integer
1 R/W Sets the overfeed timer value (mins)
Setup/Relay 1/Control On Delay 40071
Unsigned
Integer
1 R/W Sets the on delay time (sec)
Setup/Relay 1/Control Off Delay 40072
Unsigned
Integer
1 R/W Sets the off delay time (sec)
Setup/Relay 1/Control
Reset
Overfeed
Timer
40073
Unsigned
Integer
1 R/W Resets the overfeed timer
Setup/Relay 1/Event Setpoint 40074 Float 2 R/W Sets the event setpoint
Setup/Relay 1/Event Phase 40076
Unsigned
Integer
1R/W
Sets the event phase (0 = Low; 1 =
High)
Setup/Relay 1/Event Deadband 40077 Float 2 R/W Sets the event deadband
Setup/Relay 1/Event On Max Time 40079
Unsigned
Integer
1 R/W Sets the max on time (mins)
Setup/Relay 1/Event On Min Time 40080
Unsigned
Integer
1 R/W Sets the min on time (mins)
Setup/Relay 1/Event Off Max Time 40081
Unsigned
Integer
1 R/W Sets the max off time (mins)
Setup/Relay 1/Event Off Min Time 40082
Unsigned
Integer
1 R/W Sets the min off time (mins)
Table 11 sc100 Modbus Registers (continued)
Group Name Tag Name
Register
#
Data
Type
Length R/W Description

Table of Contents

Related product manuals