7
3. Installation
ENGLISH
3.3. Disconnecting/connecting the sensor
The
sensION ™+ DO 6
kits are supplied with the sensor attached to the instrument.
Fig. 3. Disconnecting/connecting the sensor to the measuring instrument
Sensor disconnection
Sensor connection
Important: do not unscrew the connector.
3.4. Carrying case
The carrying case can be used as a support for both, instrument and sensor, see figure:
Electrode position
when it is not in use.
sensION+ DO 6_HACH_0710.indd ANG:7sensION+ DO 6_HACH_0710.indd ANG:7 14/9/10 10:51:1914/9/10 10:51:19
To Next Page
Loading...
